Tag Archives: planetary right angle gearbox

China wholesaler High Precision Planetary Gearbox Right Angle Square Flange Helical Gearbox Planetary Reduction Gearbox Round Flange Transmission Gearbox for Servo Motor gearbox and motor

Product Description

Planetary Gearbox
GBR 060 10 S1 P1
Reducer Series Code Size Gear Ratio Output Shaft Type Reducer Backlash
GBR – High-Precision Right Angle Square Flange Output 60mm 90mm 115mm 142mm 1 Stage: 3   4   5   6  7  8  9 10
2 Stage: 12  15  16  20  25  28  30 
35  40  45 60  70  80  90  100
S1 – Smooth Output Shaft
S2 – Output Shaft With Key
P1 – Reduced Backlash
P2 – Standard Backlash

Series Unit GBR Z(2)
Lifetime % 20000  
Efficiency with Full Load (3) °C 97 1
  94 2
0perating Temp (4)  -25~+90  
Degree of Protection  IP65
Lubrication Lifetime Lubrication
Mounting Position Any
Motor Flange   DIN 42955-N
Item Unit GBR060 GBR090 GBR115 GBR142 Z(2)
P1 Low Backlash P1 arcmin ≤5 1
≤7 2
P2 Standard Backlash P2 arcmin ≤7 1
≤9 2
Nominal Input Speed (8) rpm 3000 2000  
Maximum Input Speed (8) rpm 6000 4000
Maximum Radial Load (5)(6)(9) N 1200 2400 4300 9100
Maximum Axial Load (5)(6)(9) 1100 2200 3900 8200
Torsional Stiffness Nm/arcmin 7 14 25 50 1
8 16 28 55 2
Weight Kg 2.1 4.2 10.5 20.3 1
2.4 4.9 11.2 21.5 2
Running noise (7) dB(A) 63 65 68 70  

(1) Ratios(=n in/n out)
(2) Number of stages
(3) Depends on the ratio, n2=100rpm
(4) Referring to the middle of the body surface
(5) These values refer to a speed of the output shaft of n2=100rpm on duty cycle KA=1
     and S1-mode for electrical machines and T= 30°C
(6) Halfway along the output shaft
(7) Sound pressure level; distance 1m; measured on idle running with an input speed of ni =3000rpm; i=5
(8) Allowed operating temperature must be kept; other input speeds on inquiry
(9) Depending on the required output torque, radial and axial loads, cycle and required storage life,                   
     deviating or partly higher values are possible.

We recommend to carry out accurate dimensioning with CHINAMFG or to consult Neugart in this respect.
FAQ
Q: How about your company?
A: We are a gear motor factory established in 1995 and located in HangZhou city of china. 
     We have more than 1200 workers. Our main product is AC micro gear motor 6W to 250W, 
     AC small gear motor 100W to 3700W, brush DC motor 10W to 400W, brushless motor10W to 750W,
     drum motor 60W to 3700W, planetary gearbox,and worm gearbox,etc.

Q: How about your quality control?
A: From raw material to finished products, we have strict and complete IPQC. 
     And the advanced test-ing machine can assure of qualified products delivered.

Q: How to choose a suitable motor?
A: If you have gear motor pictures or drawings to show us, 
    or you tell us detailed specs like volt-age, speed, torque, motor size, the working model of the motor, needed lifetime and noise level, etc. 
    please do not hesitate to let us know, then we can suggest a suitable motor per your request.

Q: Can you make the gear motor with customizing specifications?
A: Yes, we can customize per your request for the voltage, speed, torque, and shaft size and shape. 
     if you need additional wires or cables soldered on the terminal or need to add connectors, or capacitors, or EMC we can make it too.

Q: What’s your lead time?
A: Usually our regular standard product will need 10-15days, a bit longer for customized products. 
     But we are very flexible on the lead time, it will depend on the specific orders.

Q: What is your MOQ?
A: If delivered by sea, the minimum order is 100 pieces, if deliver by express, there is no limit.

Q: Do you have the item in stock?
A: l am sorry we do not have the item in stock, All products are made with orders.

Q: How to contact us?
A: You can send us an inquiry.
/* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1

Application: Industrial
Speed: Constant Speed
Function: Driving, Control
Casing Protection: Closed Type
Number of Poles: 2
Certification: ISO9001, CCC
Customization:
Available

|

Customized Request

presicion gearbox

Handling Variations in Gear Tooth Profile and Backlash in Precision Gearboxes

Precision gearboxes are designed and manufactured to minimize variations in gear tooth profile and backlash, ensuring accurate and reliable motion control:

Gear Tooth Profile: Precision gearboxes are manufactured using advanced machining techniques and quality control processes. Computer-controlled machining ensures precise gear tooth profiles that match the intended design. Modern manufacturing methods help minimize deviations and irregularities in tooth profiles, resulting in smoother meshing between gears and reduced noise.

Backlash Reduction: Backlash refers to the slight clearance between gear teeth when they mesh. In precision gearboxes, backlash is minimized through tight manufacturing tolerances and design optimization. Engineers use techniques such as preloading and fine adjustments to ensure minimal or controlled backlash. This enhances the accuracy of motion control and reduces the chances of positioning errors.

Precision gearboxes also incorporate features like anti-backlash gears, precision bearings, and high-quality lubrication to further reduce the impact of variations in gear tooth profile and backlash.

Overall, precision gearboxes are designed to provide consistent and accurate motion control, even in applications where tight tolerances are crucial.

China wholesaler High Precision Planetary Gearbox Right Angle Square Flange Helical Gearbox Planetary Reduction Gearbox Round Flange Transmission Gearbox for Servo Motor   gearbox and motor	China wholesaler High Precision Planetary Gearbox Right Angle Square Flange Helical Gearbox Planetary Reduction Gearbox Round Flange Transmission Gearbox for Servo Motor   gearbox and motor
editor by CX 2024-05-07

China Standard Gear Box Gpb CZPT Right Angle Gearbox High Precision Planetary Gearhead with Quality gearbox assembly

Product Description

TaiBang Motor Industry Group Co., Ltd.

The main products is induction   motor, reversible motor, DC brush gear  motor, DC brushless gear motor , CH/CV big gear motors , Planetary gear motor ,Worm gear motor  etc, which used widely in various fields of manufacturing pipelining, transportation, food, medicine, printing, fabric, packing, office, apparatus, entertainment etc, and is the preferred and matched product for automatic machine. 

Model Instruction

GB090-10-P2

GB 090 571 P2
Reducer Series Code External Diameter Reduction Ratio Reducer Backlash
GB:High Precision Square Flange Output

GBR:High Precision Right Angle Square Flange Output

GE:High Precision Round Flange Output

GER:High Precision Right Round Flange Output

050:ø50mm
070:ø70mm
090:ø90mm
120:ø120mm
155:ø155mm
205:ø205mm
235:ø235mm
042:42x42mm
060:60x60mm
090:90x90mm
115:115x115mm
142:142x142mm
180:180x180mm
220:220x220mm
571 means 1:10 P0:High Precision Backlash

P1:Precision Backlash

P2:Standard Backlash

Main Technical Performance
 

Item Number of stage Reduction Ratio GB042 GB060 GB060A GB090 GB090A GB115 GB142 GB180 GB220
Rotary Inertia 1 3 0.03 0.16   0.61   3.25 9.21 28.98 69.61
4 0.03 0.14   0.48   2.74 7.54 23.67 54.37
5 0.03 0.13   0.47   2.71 7.42 23.29 53.27
6 0.03 0.13   0.45   2.65 7.25 22.75 51.72
7 0.03 0.13   0.45   2.62 7.14 22.48 50.97
8 0.03 0.13   0.44   2.58 7.07 22.59 50.84
9 0.03 0.13   0.44   2.57 7.04 22.53 50.63
10 0.03 0.13   0.44   2.57 7.03 22.51 50.56
2 15 0.03 0.03 0.13 0.13 0.47 0.47 2.71 7.42 23.29
20 0.03 0.03 0.13 0.13 0.47 0.47 2.71 7.42 23.29
25 0.03 0.03 0.13 0.13 0.47 0.47 2.71 7.42 23.29
30 0.03 0.03 0.13 0.13 0.47 0.47 2.71 7.42 23.29
35 0.03 0.03 0.13 0.13 0.47 0.47 2.71 7.42 23.29
40 0.03 0.03 0.13 0.13 0.47 0.47 2.71 7.42 23.29
45 0.03 0.03 0.13 0.13 0.47 0.47 2.71 7.42 23.29
50 0.03 0.03 0.13 0.13 0.44 0.44 2.57 7.03 22.51
60 0.03 0.03 0.13 0.13 0.44 0.44 2.57 7.03 22.51
70 0.03 0.03 0.13 0.13 0.44 0.44 2.57 7.03 22.51
80 0.03 0.03 0.13 0.13 0.44 0.44 2.57 7.03 22.51
90 0.03 0.03 0.13 0.13 0.44 0.44 2.57 7.03 22.51
100 0.03 0.03 0.13 0.13 0.44 0.44 2.57 7.03 22.51

 

Item Number of stage GB042 GB060 GB060A GB90 GB090A GB115 GB142 GB180 GB220
Backlash(arcmin) High Precision P0 1       ≤1 ≤1 ≤1 ≤1 ≤1 ≤1
2           ≤3 ≤3 ≤3 ≤3
Precision P1 1 ≤3 ≤3 ≤3 ≤3 ≤3 ≤3 ≤3 ≤3 ≤3
2 ≤5 ≤5 ≤5 ≤5 ≤5 ≤5 ≤5 ≤5 ≤5
Standard P2 1 ≤5 ≤5 ≤5 ≤5 ≤5 ≤5 ≤5 ≤5 ≤5
2 ≤7 ≤7 ≤7 ≤7 ≤7 ≤7 ≤7 ≤7 ≤7
Torsional Rigidity(N.M/arcmin) 1 3 7 7 14 14 25 50 145 225
2 3 7 7 14 14 25 50 145 225
Noise(dB) 1,2 ≤56 ≤58 ≤58 ≤60 ≤60 ≤63 ≤65 ≤67 ≤70
Rated input speed(rpm) 1,2 5000 5000 5000 4000 4000 4000 3000 3000 2000
Max input speed(rpm) 1,2 10000 10000 10000 8000 8000 8000 6000 6000 4000

 Noise test standard:Distance 1m,no load.Measured with an input speed 3000rpm 

  /* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1

Application: Machinery, Agricultural Machinery
Function: Distribution Power, Change Drive Torque, Change Drive Direction, Speed Reduction
Layout: Cycloidal
Hardness: Hardened Tooth Surface
Installation: Vertical Type
Step: Double-Step
Samples:
US$ 50/Piece
1 Piece(Min.Order)

|
Request Sample

Customization:
Available

|

Customized Request

presicion gearbox

Handling Variations in Gear Tooth Profile and Backlash in Precision Gearboxes

Precision gearboxes are designed and manufactured to minimize variations in gear tooth profile and backlash, ensuring accurate and reliable motion control:

Gear Tooth Profile: Precision gearboxes are manufactured using advanced machining techniques and quality control processes. Computer-controlled machining ensures precise gear tooth profiles that match the intended design. Modern manufacturing methods help minimize deviations and irregularities in tooth profiles, resulting in smoother meshing between gears and reduced noise.

Backlash Reduction: Backlash refers to the slight clearance between gear teeth when they mesh. In precision gearboxes, backlash is minimized through tight manufacturing tolerances and design optimization. Engineers use techniques such as preloading and fine adjustments to ensure minimal or controlled backlash. This enhances the accuracy of motion control and reduces the chances of positioning errors.

Precision gearboxes also incorporate features like anti-backlash gears, precision bearings, and high-quality lubrication to further reduce the impact of variations in gear tooth profile and backlash.

Overall, precision gearboxes are designed to provide consistent and accurate motion control, even in applications where tight tolerances are crucial.

China Standard Gear Box Gpb CZPT Right Angle Gearbox High Precision Planetary Gearhead with Quality   gearbox assembly	China Standard Gear Box Gpb CZPT Right Angle Gearbox High Precision Planetary Gearhead with Quality   gearbox assembly
editor by CX 2024-04-03

China Hot selling Padr047~Padr255 Servo Motor Right Angle Precision Planetary Gearbox gearbox design

Product Description

Product Description

PADR047~PADR255 Servo Motor Right Angle Precision Planetary Gearbox


Features:

1.AOKMAN high percision planetary gearboxes including a full series of inline(linear) and right angle precision planetary gearboxes
2. High precision, high dynamic, low backlash
3. Up to 3 optional backlash: Ultra Precision Backlash, High Precision Backlash, Standard Backlash
4. Superior performance for precision industrial automation and servo applications

Detailed Photos

Components:
1. Gearbox Housing & Flange: Aluminum-alloy Die Casting ADC12
2. Gear set: Precision Planetary Gear Set
Ring Gears: 40Cr
Planetary Gears: 20CrMnTi, Surface Hardness HRC58~62, Inner Hardness HRC33~40
3. Input Configurations: Keyed Hollow Shaft with Motor Adaptor
4. Output Configurations: Keyed CHINAMFG Shaft Output
keyless Solid Shaft Output
5. Applicable Motors:
Servo Motors, Stepper Motors

Product Parameters

 

series Stage Models Ratio Rated Torque Rated input Speed Max input Speed Backlash Efficiency
PPG(Linear) 1 PPG040 3,4,5,7,8,10 9N.m~423N.m 25,003,000,360,040,000,000 3600 ≤10 arcmin ≥97%
PPG060 4800
PPG080 6000
PPG120 8000
PPG160  
2 PPG040 12,15,20,25,30,35,40,50,70,100 9N.m~423N.m 25,003,000,360,040,000,000 3600, ≤15 arcmin ≥94%
PPG060 4800
PPG080 6000
PPG120 8000
PPG160  

Packaging & Shipping

Company Profile

Our Advantages

FAQ

1. How to choose a gearbox which meets our requirement?
You can refer to our catalogue to choose the gearbox or we can help to choose when you provide
the technical information of required output torque, output speed and motor parameter etc.
 2. What information shall we give before placing a purchase order?
a) Type of the gearbox, ratio, input and output type, input flange, mounting position, and motor information etc.
b) Housing color.
c) Purchase quantity.
d) Other special requirements.
 3. What industries are your gearboxes being used?
Our gearboxes are widely used in the areas of textile, food processing, beverage, chemical industry,escalator,automatic storage equipment,metallurgy,environmental protection, logistics and etc.
 4. Do you sell motors?
Yes,We produce different types of motors.We can provide motors with high quality.
 

 

/* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1

Application: Motor, Machinery
Layout: Coaxial
Hardness: Hardened Tooth Surface
Installation: Horizontal Type
Step: Three-Step
Type: Planetary Gear Box
Customization:
Available

|

Customized Request

presicion gearbox

Handling Variations in Gear Tooth Profile and Backlash in Precision Gearboxes

Precision gearboxes are designed and manufactured to minimize variations in gear tooth profile and backlash, ensuring accurate and reliable motion control:

Gear Tooth Profile: Precision gearboxes are manufactured using advanced machining techniques and quality control processes. Computer-controlled machining ensures precise gear tooth profiles that match the intended design. Modern manufacturing methods help minimize deviations and irregularities in tooth profiles, resulting in smoother meshing between gears and reduced noise.

Backlash Reduction: Backlash refers to the slight clearance between gear teeth when they mesh. In precision gearboxes, backlash is minimized through tight manufacturing tolerances and design optimization. Engineers use techniques such as preloading and fine adjustments to ensure minimal or controlled backlash. This enhances the accuracy of motion control and reduces the chances of positioning errors.

Precision gearboxes also incorporate features like anti-backlash gears, precision bearings, and high-quality lubrication to further reduce the impact of variations in gear tooth profile and backlash.

Overall, precision gearboxes are designed to provide consistent and accurate motion control, even in applications where tight tolerances are crucial.

China Hot selling Padr047~Padr255 Servo Motor Right Angle Precision Planetary Gearbox   gearbox design		China Hot selling Padr047~Padr255 Servo Motor Right Angle Precision Planetary Gearbox   gearbox design
editor by CX 2024-02-28

China Custom Fabr High Precision Right Angle Planetary Gearbox gearbox design

Product Description

FABR High PRECISION RIGHT ANGLE PLANETARY GEARBOX

 

Product Description

STARSHINE DRIVE FABR series high precision planetary gearbox adopts the integrated design of planet carrier and output shaft to ensure the maximum torque stiffness and stability. Backlash types can be chosen depends on customers’ needs: Micro precision backlash (P0), precision backlash (P1) and standard backlash (P2) are available. Due to the high cost performance of FABR series planetary gearbox, it is widely used in motion control industries for servo application. FABR  precision gearboxes are featured with high torque which can greatly meet the customer needs. Single-stage planetary gearboxes and two-stage gearboxes are available:

1-stage :3 / 4 / 5 / 6 / 7 / 8 / 10 / 14 / 20
2-stage :12/ 15 / 20 / 25 / 30 /35 / 40 / 50 / 60 / 70 / 80 / 100 / 120 / 140 / 160 / 200
FEATURES
1,Low backlash, high rigidity and high torque are the main characteristics of the,FABR precision planetary gearbox.
2,The right angle design of the reducer can be efficiently save the mounting space.
3,The elastic design of the connecting plate and the various sizes enables our gearbox to be combined with all brand of servo motors.
4,High quality synthetic lubricants are used to make all parts in the gearbox are fully lubricated and protected.
 

Product Parameters

 

SIZE Output torque Ratios Low backlash High efficiency
FABR042 / FABR060 /FABR090 / FABR115 / FABR142 / FABR180 / FABR220 T2N : 14 Nm – 2000 Nm 1-stage :3 / 4 / 5 / 6 / 7 / 8 / 10 / 14 / 20
2-stage :12/ 15 / 20 / 25 / 30 /35 / 40 / 50 / 60 / 70 / 80 / 100 / 120 / 140 / 160 / 200
1-stage : <=2arcmin / <=4arcmin / <=6arcmin
2-stage : <=4arcmin / <=7arcmin / <=9arcmin
1-stage : >= 95%
2-stage : >= 92%

Detailed Photos

Company Profile

ABOUT CHINAMFG DRIVE 

ZheJiang CHINAMFG Drive Co.,Ltd(Starshine) have a strong technical force with over 350 employees at present, including over 30 engineering technicians, 30 quality inspectors, covering an area of 80000 square CHINAMFG and kinds of advanced processing machines and testing equipments. We have a good foundation for the industry application development and service of high-end speed reducers & variators owning to the provincial engineering technology research center,the lab of gear speed reducers, and the base of modern R&D.

Our products are widely used in ceramic industry, glass industry, woodworking machinery , high voltage switch, food & beverage, packaging & printing, Storage & logistics, hoisting & transportation facilities…etc , and CHINAMFG technically provide the professional product & service for the medium and high-end customers, and our gearboxes are best-selling in domestic, and even in abroad , such as in Europe, North America, South America, Middle East, South Asia, Southeast Asia, Africa…etc.

 In the future , CHINAMFG will hold the creed of “serving customer, diligence & simplicity, self-criticism, innovation, honesty, teamwork”, and the concept of “quality creates value” to focus on the customers’ requirements and provide them the competitive transmission solution and create value for them constantly, and make a high-end equipment manufacturing industry and create a preferred brand of replacing import products and upgrading continuously for the end users.

TEAM 

Our Advantages

QUALITY CONTROL

Quality:Insist on Improvement,Strive for CHINAMFG With the development of equipment manufacturing indurstry,customer never satirsfy with the current quality of our products,on the contrary,wcreate the value of quality.
Quality policy:to enhance the overall level in the field of power transmission  
Quality View:Continuous Improvement , pursuit of CHINAMFG
Quality Philosophy:Quality creates value

3. Incoming Quality Control
To establish the AQL acceptable level of incoming material control, to provide the material for the whole inspection, sampling, immunity. On the acceptance of qualified products to warehousing, substandard goods to take return, check, rework, rework inspection; responsible for tracking bad, to monitor the supplier to take corrective measures to prevent recurrence.

4. Process Quality Control
The manufacturing site of the first examination, inspection and final inspection, sampling according to the requirements of some projects, judging the quality change trend; found abnormal phenomenon of manufacturing, and supervise the production department to improve, eliminate the abnormal phenomenon or state

5. FQC(Final QC)
After the manufacturing department will complete the product, stand in the customer’s position on the finished product quality verification, in order to ensure the quality of customer expectations and needs.

6. OQC(Outgoing QC)
After the product sample inspection to determine the qualified, allowing storage, but when the finished product from the warehouse before the formal delivery of the goods, there is a check, this is called the shipment inspection.Check content:In the warehouse storage and transfer status to confirm, while confirming the delivery of the product is a product inspection to determine the qualified products.

Packaging & Shipping

PACKING 

DELIVERY 
/* March 10, 2571 17:59:20 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1

Application: Machinery, Agricultural Machinery, Ceramic, Glass, Logistic
Function: Change Drive Torque, Speed Changing, Speed Reduction, High Quality Gearboxes Proven Solutions
Layout: Corner
Hardness: Hardened Tooth Surface
Installation: Vertical Type
Step: Three-Step
Customization:
Available

|

Customized Request

presicion gearbox

Precision Gearbox: Enhancing Mechanical Systems

A precision gearbox is a specialized type of gearbox designed to offer exceptionally accurate and controlled motion in mechanical systems. It enhances mechanical systems in several ways:

1. Accurate Positioning: Precision gearboxes provide precise and repeatable positioning, making them ideal for applications requiring tight tolerances and accurate alignment.

2. Reduced Backlash: Backlash, which is the play between gear teeth, is minimized in precision gearboxes, ensuring minimal lost motion and improved accuracy.

3. High Gear Ratio: Precision gearboxes often feature high gear ratios, enabling fine adjustments and controlled motion even in systems with high torque requirements.

4. Smooth Operation: With minimal vibration and noise, precision gearboxes offer smooth and stable operation, crucial for applications requiring consistent movement.

5. High Torque Transmission: Precision gearboxes are capable of transmitting high levels of torque efficiently and accurately, making them suitable for heavy-duty applications.

6. Optimized Efficiency: Precision gearboxes are engineered to reduce friction losses and energy waste, resulting in improved overall system efficiency.

7. Customization: These gearboxes can be customized for specific applications, allowing engineers to tailor gear ratios, sizes, and configurations to match the system’s requirements.

8. Automation and Robotics: Precision gearboxes are vital components in automation and robotics, where precise movement and positioning are critical for tasks such as assembly, inspection, and handling.

9. Instrumentation: In scientific and analytical instruments, precision gearboxes ensure accurate movement of components, contributing to the precision and reliability of measurements.

10. Aerospace and Defense: Precision gearboxes are used in aerospace and defense applications, where accurate motion and high reliability are essential for tasks such as satellite positioning and guidance systems.

By providing accuracy, stability, and optimized performance, precision gearboxes are fundamental in enhancing the functionality and efficiency of various mechanical systems across industries.

China Custom Fabr High Precision Right Angle Planetary Gearbox   gearbox design		China Custom Fabr High Precision Right Angle Planetary Gearbox   gearbox design
editor by CX 2024-02-25